Menu
You shall prepare yourself for the Cisco Certified Support Technician (CCST) Networking (100-150) exam, take the Cisco Certified Support Technician (CCST) Networking (100-150) practice exams well, and then attempt the final 100-150 test. So, start your journey by today, get the DumpsTests Cisco Certified Support Technician (CCST) Networking (100-150) study material, and study well. No one can keep you from rising as a star in the sky.
Many customers may be doubtful about our price. The truth is our price is relatively cheap among our peer. The inevitable trend is that knowledge is becoming worthy, and it explains why good 100-150 resources, services and data worth a good price. We always put our customers in the first place. Thus we offer discounts from time to time, and you can get 50% discount at the second time you buy our 100-150 question dumps after a year. Lower price with higher quality, that’s the reason why you should choose our 100-150 prep guide.
>> Reliable 100-150 Test Bootcamp <<
DumpsTests has built customizable Cisco 100-150 practice exams (desktop software & web-based) for our customers. Users can customize the time and Cisco Certified Support Technician (CCST) Networking (100-150) questions of Cisco 100-150 Practice Tests according to their needs. You can give more than one test and track the progress of your previous attempts to improve your marks on the next try.
NEW QUESTION # 20
DRAG DROP
Move each protocol from the list on the left to its correct example on the right.
Answer:
Explanation:
Explanation:
The correct matching of the protocols to their examples is as follows:
DHCP: Assign the reserved IP address 10.10.10.200 to a web server at your company.
DNS: Perform a query to translate companypro.net to an IP address.
ICMP: Perform a ping to ensure that a server is responding to network connections.
Here's how each protocol corresponds to its example:
DHCP (Dynamic Host Configuration Protocol) is used to assign IP addresses to devices on a network.
In this case, DHCP would be used to assign the reserved IP address 10.10.10.200 to a web server.
DNS (Domain Name System) is used to translate domain names into IP addresses. Therefore, to translate companypro.net to an IP address, DNS would be utilized.
ICMP (Internet Control Message Protocol) is used for sending error messages and operational information indicating success or failure when communicating with another IP address. An example of this is using the ping command to check if a server is responding to network connections.
These protocols are essential for the smooth operation of networks and the internet.
Perform a query to translate companypro.net to an IP address.
DNS (Domain Name System): DNS is used to resolve domain names to IP addresses.
Assign the reserved IP address 10.10.10.200 to a web server at your company.
DHCP (Dynamic Host Configuration Protocol): DHCP is used to assign IP addresses to devices on a network.
Perform a ping to ensure that a server is responding to network connections.
ICMP (Internet Control Message Protocol): ICMP is used by network devices to send error messages and operational information, and it is the protocol used by the ping command.
DNS (Domain Name System): DNS translates human-friendly domain names like "companypro.net" into IP addresses that computers use to identify each other on the network.
DHCP (Dynamic Host Configuration Protocol): DHCP automatically assigns IP addresses to devices on a network, ensuring that no two devices have the same IP address.
ICMP (Internet Control Message Protocol): ICMP is used for diagnostic or control purposes, and the ping command uses ICMP to test the reachability of a host on an IP network.
Reference: DNS Basics: What is DNS?
DHCP Overview: What is DHCP?
ICMP and Ping: Understanding ICMP
NEW QUESTION # 21
Move the security options from the list on the left to its characteristic on the right. You may use each security option once, more than once, or not at all.
Note: You will receive partial credit for each correct answer.
Answer:
Explanation:
Explanation:
The correct matching of the security options to their characteristics is as follows:
* WPA2-Enterprise: Uses a RADIUS server for authentication
* WEP: Uses a minimum of 40 bits for encryption
* WPA2-Personal: Uses AES and a pre-shared key for authentication
Here's why each security option matches the characteristic:
* WPA2-Enterprise uses a RADIUS server for authentication, which provides centralized Authentication, Authorization, and Accounting (AAA) management for users who connect and use a network service.
* WEP (Wired Equivalent Privacy) is an outdated security protocol that uses a minimum of 40 bits for encryption (and up to 104 bits), which is relatively weak by today's standards.
* WPA2-Personal (Wi-Fi Protected Access 2 - Personal) uses the Advanced Encryption Standard (AES) for encryption and a pre-shared key (PSK) for authentication, which is shared among users to access the network.
These security options are essential for protecting wireless networks from unauthorized access and ensuring data privacy.
NEW QUESTION # 22
Examine the following output:
Which two conclusions can you make from the output of the tracert command? (Choose 2.) Note: You will receive partial credit for each correct answer.
Answer: B,E
Explanation:
*Statement A: "The trace successfully reached the www.cisco.com server." This is true as indicated by the
"Trace complete" message at the end, showing that the trace has reached its destination.
*Statement C: "The IPv6 address associated with the www.cisco.com server is 2600:1408:c400:38d::b33." This is true because the final hop in the trace, which is the destination, has this IPv6 address.
*Statement B: "The trace failed after the fourth hop." This is incorrect as the trace continues beyond the fourth hop, despite some intermediate timeouts.
*Statement D: "The routers at hops 5 and 6 are offline." This is not necessarily true. The routers might be configured to not respond to traceroute requests.
*Statement E: "The device sending the trace has IPv6 address 2600:1408:c400:38d::b33." This is incorrect; this address belongs to the destination server, not the sender.
References:
*Understanding Traceroute: Traceroute Guide
NEW QUESTION # 23
Which two pieces of information should you include when you initially create a support ticket? (Choose 2.)
Answer: A,D
Explanation:
Statement A: "A detailed description of the fault." This is essential for support staff to understand the nature of the problem and begin troubleshooting effectively.
Statement C: "A description of the conditions when the fault occurs." This helps in reproducing the issue and identifying patterns that might indicate the cause of the fault.
Statement B: "Details about the computers connected to the network." While useful, this is not as immediately critical as understanding the fault itself and the conditions under which it occurs.
Statement D: "The actions taken to resolve the fault." This is important but typically follows the initial report.
Statement E: "The description of the top-down fault-finding procedure." This is more of a troubleshooting methodology than information typically included in an initial support ticket.
Reference: Best Practices for Submitting Support Tickets: Support Ticket Guidelines
NEW QUESTION # 24
You need to connect a computer's network adapter to a switch using a 1000BASE-T cable.
Which connector should you use?
Answer: A
Explanation:
* 1000BASE-T Cable: This refers to Gigabit Ethernet over twisted-pair cables (Cat 5e or higher).
* Connector: RJ-45 connectors are used for Ethernet cables, including those used for 1000BASE-T.
* Coax: Used for cable TV and older Ethernet standards like 10BASE2.
* RJ-11: Used for telephone connections.
* OS2 LC: Used for fiber optic connections.
Reference: * Ethernet Standards and Cables: Ethernet Cable Guide
NEW QUESTION # 25
......
With the help of our 100-150 training guide, your dream won’t be delayed anymore. Because, we have the merits of intelligent application and high-effectiveness to help our clients study more leisurely on our 100-150 practice questions. If you prepare with our CCST actual exam for 20 to 30 hours, the exam will become a piece of cake in front of you. And the pass rate of our 100-150 learning guide is high as 98% to 100%, you will be satisfied with it if you buy it.
Exam 100-150 Study Guide: https://www.dumpstests.com/100-150-latest-test-dumps.html
All of them are usable with unambiguous knowledge up to now and still trying to edit more in the future (100-150 learning materials), Cisco Reliable 100-150 Test Bootcamp Our customer service is 365 days warranty, Our 100-150 practice questions can provide the most of questions and answers similar with the 100-150 real exam test, All we know an attractive certification will help you to find a decent job and get a promotion, such as 100-150.
Asking Questions as a Method of Generating Test 100-150 Ideas, The goal is to show the design and full integration of a complete Web service, All of them are usable with unambiguous knowledge up to now and still trying to edit more in the future (100-150 Learning Materials).
Our customer service is 365 days warranty, Our 100-150 practice questions can provide the most of questions and answers similar with the 100-150 real exam test.
All we know an attractive certification will help you to find a decent job and get a promotion, such as 100-150, There is no denying that your emotion will have a dramatic impact on your performance in the test , so it is of great significance for you to take part in the mock exam for many times until you get familiar with the exam atmosphere and won't feel nervous about the exam any more with our 100-150 test preparation.
